LineageOS 13.0 [6.0.1][HOT3_A1&A2[MT6580][k3.10.72]

1 minute read
8

LineageOS 13 for MT6580 is an aftermarket ROM based on Android Marshmallow
ROM is stable . It can be used as a daily driver without any issuse 
I believe we all know about CM 13 for MT6580 and I don't need to tell you about it
( This ROM is compiled from sourceby Vgdn1942&Ibrahim1973)

Note : This ROM can be ported to any MT6580 device running
 Android Lollipop 5.1.x with kernel 3.10.x



What's Working :
GPS
Camera
Audio in calls
Bluetooth
USSD
Audio
Mic
RIL
SMS (Receive and Send both working)
WiFi
Data
Dual SIM
Gapps
Hotspot
Screen Recording
Both Storages (SD and Internal) mounting in both Phone and PC
Gapps


lineage OS 13.0 Changelog v2.0 (Build 2017-12-29) :
  • -Error NVram(FIXED)
  • -Physical key(FIXED)
  • -Front Flash(FIXED)
  • -Green camera(FIXED)
  • -Camera focus(FIXED)
  • -Video recording(FIXED)
  • -Low icon signal(FIXED)
  • -widget not working after restart(FIXED)
  • -Swapped SIM cards(FIXED)
  • *All languages have been added
  • *USB Connected to PC
  • *More Smooth And Stable...

 Bugs:

  • -NO BuGS ROM is Stable


 Patch V10 : Click Here
Gapps : Click Here ARM - 6.0 - pico

please flash Gapps right after you flash the ROM



Install Guide:
  1. Boot to your recovery
  2. Wipe data
  3. Click advanced wipe and check _ Dalvik/ART- Cache - System - Data ->wipe 
  4. Go back and install the ROM
  5. Go back and install the Patch
  6. Optionally install Gapps
  7. Reboot & enjoy



Credits:
Ibrahim1973@git
Vgdn1942@git

Post a Comment

8 Comments
  1. What is the porting guide
    Bro
    Help

    ReplyDelete
    Replies
    1. Anonymous2/04/2018

      LineageOS 13.0 (3.10.72) porting guide (by kva3ar from 4PDA + some notes):
      1. Open port updater-script with Notepad++ and remove first two lines.
      2. Unpack stock and port boot images with AndImgTool. Replace port/kernel folder with stock one then rebuild port image (drag port folder onto AndImgTool executable)
      3. Replace the following files with stock:
      system/lib/hw
      audio.primary.mt6580.so
      camera.mt6580.so
      gps.default.so
      gralloc.mt6580.so
      hwcomposer.mt6580.so
      memtrack.mt6580.so
      sensors.mt6580.so
      -----------------------------
      Folders

      system/etc/fmr
      system/etc/mddb
      system/etc/firmware
      system/etc/radvd
      system/etc/wifi
      ------------------------------
      system/lib
      libcam.paramsmgr.so
      lib3a.so
      libcamdrv.so
      libdpframework.so
      liba3m.so
      libcameracustom.so (be careful, may cause bootloop)
      libfeatureio.so
      ------------------------------
      4. Edit build.prop
      Change ro.sf.lcd_density value with yours and set qemu.hw.mainkeys to 1
      5. Remove /usr/keylayout/mtk-tpd.kl
      6. Make ZIP archive and sign it
      7. Install TWRP (3.1.x is preferred), wipe data, cache and dalvik cache.
      8. Flash the ROM.

      Delete
  2. Hello what is porting about?

    ReplyDelete
  3. Hi,

    Thanks for the information! I tried to update my VKworld VK700x, but rund into a bootloop. It would be very helpful to have some more information about "this ROM can be ported" .. how EXACTLY can this be done? What does the following comment mean: (be careful, may cause bootloop) Is it really necessary to delete some lines in the updater script?

    Kind regards,
    Uli

    ReplyDelete
  4. just port kernel from boot.img

    ReplyDelete
  5. Thanks a lot, it has worked now! For porting the kernel, I followed the instructions here: http://sandipsky.blogspot.com/2017/10/how-to-portedit-bootimg-and-kernel.html - that was enough.

    You should delete the comment from Anonymous with the wrong "porting guide".

    ReplyDelete
  6. Anonymous2/09/2020

    hi, i've ported this rom on a mt6580 device and it works good, but i am not able to get ril antenna working, always no service or sometimes just some gsm signal, what could be the fix? I've tried to change modem file, only gsm-edge but same results no 3g-4g . With stock rom antenna works perfectly, but if i try to port ril on lineage, it doesn't detect sims, what could be the fix for this?

    ReplyDelete
  7. Anonymous11/07/2020

    SHUT UP SHALIZA, dis is larray... i will murder u again... we be on battle soon in roblox so shutup (THIS AINT A RACE, TONY LOPEZ CAUGHT A CASE)

    ReplyDelete
Join the conversation(8)

#buttons=(Ok, Go it!) #days=(20)

Our website uses cookies to enhance your experience. Learn More
Ok, Go it!
To Top